January 15, 2022

Cornerstone Specialty Wood Products Unveils New ResinDek® Shelving System

CINCINNATI, August 12, 2021 / PRNewswire / – Designed to store and organize crates, paper files or other items in industrial pallet racks or storage racks, the new ResinDek® shelving system from Cornerstone Specialty Wood Products, LLC® ( www.resindek.com) is now available. Fully customizable, the ResinDek shelving system is made up of three components: ResinDek horizontal shelving, ResinDek vertical dividers, and wood brackets that span the distance of the rack beams, including those with stepped construction.

Made in the country, each ResinDek shelving system can be designed and built to accommodate shelf heights of 6 to 20 inches, shelf depths of 8 to 60 inches, and vertical partition spaces of 4. at 48 inches in the center. Because they are custom-machined, the dividers can be installed in place quickly and securely – no fasteners, screws or other hardware required. This feature significantly reduces installation time.

In addition, the ResinDek shelving system is custom made using a proprietary blend of moisture resistant medium and high density fiberboard in thicknesses from 0.25 inch to 0.75 inch. Shelves can be supplied unfinished or with Cornerstone Gray Diamond Seal® 2 finish.

“The engineered wood composite material offers similar performance to dividers or steel shelving inserts, but at a fraction of the cost,” said Greg Doppler, president. “Compared to cardboard dividers, ResinDek shelves offer structural integrity and significantly extended life, ensuring peak performance for years to come. “

In addition, the ResinDek shelving system has been independently evaluated by IAPMO Uniform Evaluation Services, an internationally recognized organization of independent structural engineers. The IAPMO has found that the ResinDek shelving system complies with building code regulations (IBC) and can be installed in Type IV buildings, where it is not part of the building structure, as shown in the IBC table 601. (IAPMO Uniform Evaluation Services USA ER number 467 and Canada ER number UEL 5027.) In addition, the ResinDek shelving system has been independently evaluated, tested, approved and received the S-Mark of Seizmic by SMHE Inc., for its nominal load capacity.

Wood brackets are manufactured in accordance with Southern Pine Inspection Bureau standards. Cornerstone Specialty Wood Products supplies # 2 quality stamped Southern Yellow Pine wood backing. Brackets can be custom machined to meet unique site requirements, including notches to accommodate the height of a tread beam and horizontal shelving elements.

Wood supports have been extensively tested for this application. Load capacity varies with length of bracket, but they have been proven to support up to 800 lbs each when length is 48 “or less. Ends of wood brackets can be screwed to rack beams or shelving at their ends.

For more information, visit Cornerstone Specialty Wood Products at https://www.resindek.com/product-detail/resindek-shelving-system.

ABOUT CORNERSTONE SPECIALITY WOOD PRODUCTS, LLC
For over 20 years, Cornerstone Specialty Wood Products, LLC (www.resindek.com) has been at the forefront of research and development in engineered wood flooring panels for the material handling industry. In 1994, Greg Doppler, founder and president of the company, invented the ResinDek panel, which became the first mezzanine floor panel product sold in the world today.

CONTACT: Sand ball
Cornerstone Specialty Wood Products, LLC
513.996.4882 | [email protected]

Cornerstone SOURCE Specialty Wood Products


Source link